Miele G 6365 Operating Instructions Manual Download Page 76

Page: 76 / 92

Frequently Asked Questions

Problem

Possible cause and solution

Dishware is not dry or
cutlery and glasses are
spotty.

The rinse aid dosage is set too low or the rinse aid
reservoir is empty.

Replenish the reservoir, increase the dosage, or
change the brand of rinse aid (see "Before using
for the first time - Rinse aid").

Dishware was taken out of the cabinet too soon.

Leave it in for longer (see "Operation").

Combination tabs have been used which have im‐
paired drying performance.

Change your detergent, or replenish the rinse aid
(see "Before using for the first time - Rinse aid").

Glasses have a brown‐
ish-blue discoloration;
the deposit cannot be
wiped off.

Detergent deposits.

Switch to another detergent.

Glasses are dull and
discolored; the deposit
cannot be wiped off.

The glassware is not dishwasher-safe. The surfaces
are affected.

There is no remedy.
Purchase glassware which is dishwasher-safe.

Tea or lipstick stains
have not been com‐
pletely removed.

The wash temperature of the selected program was
too low.

Select a program with a higher wash temperature.

The bleaching effect of the detergent is too low.

Switch to another detergent.

Plastic parts are discol‐
ored.

Natural dyes, e.g., from carrots, tomatoes, or ketchup
may be the cause. The amount of detergent used or
its bleaching effect was not sufficient to deal with
natural dyes.

Use more detergent (see "Operation - Detergent").
Discoloration is irreversible.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands