Miele G 6365 Operating Instructions Manual Download Page 49

Page: 49 / 92

Options

Start at

With the

6WDUWDW

function, you set the

exact time at which you want the pro‐
gram to start.

Use the

ҟҞ

arrow buttons to set the

hour and confirm with

The hour will be saved and the minute
number block will be highlighted.

Use the

ҟҞ

arrow sensors to set the

minutes and confirm with

The saved start time for the program
selected will appear in the display.
The

indicator light will come on.

Close the door within four seconds.

When the set time is reached, the pro‐
gram selected will begin automatically.

Finish at

With the

)LQLVKDW

function, you set the

time at which you wish the program to
end.

Use the

ҟҞ

arrow buttons to set the

hour and confirm with

The hour will be saved and the minute
number block will be highlighted.

Use the

ҟҞ

arrow sensors to set the

minutes and confirm with

The estimated start time for the pro‐
gram selected will appear in the display.
The

indicator light will come on.

Close the door within four seconds.

A message will appear in the display if
the program cannot be completed by
the set finish time because it has too
long a running time.

The program will start automatically
when the estimated start time is
reached.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands