Miele G 6365 Operating Instructions Manual Download Page 53

Page: 53 / 92

Settings menu

Adjusting default values

Opening the Settings menu

Open the door.

Switch the dishwasher off with the

button if it is switched on.

Press and hold the

button.

Switch the dishwasher on with the

button. Release this button as soon
as the background lighting lights up
in the display. Keep the

button

pressed for at least 4 seconds.

The first option in the Settings menu
will appear in the display.

To learn about the display, read the
section with the same name.

Use the

ҟҞ

arrow buttons under‐

neath the display to select the option
you want to change and confirm your
selection with

Sub-menu options which have already
been selected will have a check

be‐

side them.

To exit a sub-menu, use the

ҟҞ

ar‐

row buttons to select

%DFN䭈

and

confirm with

The display will revert to the menu
above.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands