Miele G 6365 Operating Instructions Manual Download Page 67

Page: 67 / 92

Cleaning and care

Cleaning the spray arms

Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected and
cleaned regularly (approx. every 4 - 6
months).

Turn the dishwasher off.

Remove the spray arms as follows:

Take out the cutlery tray (if your dish‐
washer is fitted with one).

Push the

top

spray arm upwards to

engage the inner ratchet. Then un‐
screw the spray arm.

Push the

middle

spray arm upwards

to engage the ratchet. Then un‐

screw the spray arm

Remove the lower basket.

Pull the

lower

spray arm firmly up‐

wards to remove it.

Use a pointed object to push the
food particles that are stuck in the
spray arm jets into the spray arm.

Rinse the spray arms thoroughly un‐
der running water.

Replace the spray arms and check
that they rotate freely.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands