Miele G 6365 Operating Instructions Manual Download Page 19

Page: 19 / 92

Before using for the first time

Basic settings

Open the door.

Turn the dishwasher on with the

button.

The welcome screen will appear when
the dishwasher is turned on for the first
time.

Language

The display will change automatically to
the screen for setting the language.

Use the

ҟҞ

arrow sensors to select

the language you want and also the
country, if appropriate, and confirm
your selection with

To learn about the display, read the
section with the same name.

A check

will appear next to the lan‐

guage that has been set.

Time of day

The display will then change to the
screen for setting the time.

The current time of day must be set be‐
fore you can use the "FlexiTimer" pro‐
gram option.

Use the

ҟҞ

arrow buttons to set the

hour and confirm with

Then set the minutes and confirm
with

Keeping the

ҟҞ

arrow buttons press‐

ed will increase or decrease the time
automatically.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands