Miele G 6365 Operating Instructions Manual Download Page 47

Page: 47 / 92

Options

You can select and deselect the options
using the appropriate buttons and the
display.

Open the door.

Turn the dishwasher on with the

button.

The indicator light next to the program
selected will come on.

Select a program.

Press the button for the option you
want.

The indicator light for the relevant but‐
ton will come on if the option is availa‐
ble for the program selected.

If the option is not compatible with the
program selected, a message to this ef‐
fect will appear in the display.

In this instance, confirm the message
with

Start the program by closing the
door.

The option selected will remain active
for that particular program until the set‐
ting is changed.

Short

The

Short

option reduces the duration

of programs in which this option is
available by up to 30%.

In order to achieve optimum cleaning
results, energy consumption may in‐
crease slightly with this option.

When used in combination with the
Rapid program, the

Short

option results

in a wash program without drying or au‐
tomatic opening of the door (if availa‐
ble).

Extra economical

The

Extra Economical

option reduces

the energy consumption of programs in
which this option is available by up to
20%.

In order to achieve optimum cleaning
results, the program duration is extend‐
ed with this option.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands