Miele G 6365 Operating Instructions Manual Download Page 36

Page: 36 / 92

Loading the dishwasher

Grates and filters

You can also wash Miele grates and
Miele range hood filters.

Select the

*UDWHV )LOWHUV

program for

optimum dishwashing results.

Protruding parts can damage the

dishwasher.
Load the dishwasher in such a way
that no corners protrude over the
side of the basket.

Heavy and sharp wash loads can

damage the coating of the basket
struts.
Load grates and filters carefully.

Only place dishwasher safe

Miele grates and filters in the dish‐
washer.

Grates

Rust damages the dishwasher.

Wash only grates that are undam‐
aged and not rusty.

Place the upper basket in the top po‐
sition.

Load the grate in the bottom basket.
To do so, remove the MultiComfort
insert and fold over the front row of
spikes.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands