Miele G 6365 Operating Instructions Manual Download Page 18

Page: 18 / 92

Before using for the first time

Opening the door

At the end of programs with a drying
phase (see "Program overview"), the
door will open automatically a little in
order to help the drying process.
This function can be deactivated if pre‐
ferred (see "Settings menu - AutoOp‐
en").

Pull the handle to open the door.

Open the door fully so that the door
catch rail retracts again.

If the door is opened during operation,
all functions are automatically interrupt‐
ed.

Water in the dishwasher may be

hot. Danger of scalding!
Only open the door during operation
if absolutely necessary and exercise
extreme caution when doing so.

Keep the area around the door

free of obstructions.

Closing the door

Push the baskets in.

Then lift the door upwards and push
until it clicks into position.

Danger of crushing injuries!

Do not put your hand inside the door
as it is closing.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands