Miele G 6365 Operating Instructions Manual Download Page 74

Page: 74 / 92

Frequently Asked Questions

Noises

Problem

Possible cause and solution

There is a knocking
noise in the wash cabi‐
net.

A spray arm is hitting the dishware.

Interrupt the program, and rearrange the items
which are obstructing the spray arm.

There is a rattling noise
in the wash cabinet.

Dishware is moving around in the wash cabinet.

Interrupt the program and rearrange loose pieces.

A foreign object (e.g., a cherry pit) has become
lodged in the drain pump.

Remove the foreign object from the drain pump
(see "Maintenance - Cleaning the drain pump and
non-return valve").

There is a knocking
noise from the water
pipe

This may be caused by the installation or the diame‐
ter of the water pipe.

This has no influence on dishwasher function. If in
doubt, contact a suitably qualified plumber.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands