Miele G 6365 Operating Instructions Manual Download Page 71

Page: 71 / 92

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The Optical Interface is
flashing quickly.
The buzzer is sounding.
One of the following
faults appears in the
display:

2SHQZDWHUVXSSO\

The water supply is turned off.

Turn on the water supply all the way.

,QWDNH

Before fixing the fault:

Turn the dishwasher off with the

button.

There is a problem with the water intake.

Turn on the water supply fully and start the pro‐
gram again.

Clean the water intake filter (see "Frequently asked
questions").

The water pressure at the intake is lower than 7.25
psi.
Contact a plumber.

The following message
appears in the display
during the

(QHUJ\6DYHU

program:

,QWDNHWHPSORZ

The intake water has not reached the required tem‐
perature of 120°F (45°C) (see "Water connection -
Water intake").

Start the program again.

If the fault message appears again, select a differ‐
ent program.

Summary of Contents for G 6365





























































































Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands

Miele G 6365, Operating Instructions Manual

Search results

Summary of Contents for G 6365

Reviews:

Related manuals for G 6365

Brands by name

Popular brands