Problem
Possible cause and remedy
F
and a number
appear in the
display.
F 10
The suction tube in the water container
– is not fitted correctly
– is not positioned vertically
^
Connect it properly and make sure it is vertical:
F 11
F 20
Blocked drain hoses
^
Descale the appliance. If the fault message appears in the
display again call the Service Department.
F 44
Communication fault
^
Switch the appliance off and then back on again after a few
minutes.
If the fault code appears in the display again call the Ser-
vice Department.
F 55
The maximum length of time for which the steam combi oven
can be operated has been exceeded and so the appliance
has switched itself off automatically for safety reasons.
^
The appliance can be used again immediately by switching
it off and on again.
Problem solving guide
143