Operation
56
Cleaning the steam oven
Remove the water container and
condensate container and empty
them as required.
Switch the steam oven off.
Appliance rinsing
appears after a cooking
programme involving steam.
Follow the instructions on the display.
The rinsing process should be
carried out every time to flush any
remaining food deposits out of the
system.
If you have selected
Display
|
QuickTouch
|
Off
in the settings menu,
you will have to switch the steam oven
on in order to open the door.
Clean and dry the whole steam oven
as described in “Cleaning and care”.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the
container with fresh water.
Take out the water container and
replenish the water.
Push the water container into the
appliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the
sensor control to
change the values or settings for this
programme.
Select the
sensor control.
Depending on the function, the
following settings appear:
–
Temperature
–
Moisture
–
Duration
–
Booster
–
Pre-heat
–
Crisp function
Changing values and settings
Select the desired value or setting
and confirm with
OK
.
Change the value or setting and
confirm with
OK
.
The cooking programme will restart with
the new values and settings.
