Problem solving guide
154
Issue
Cause and remedy
After moving house, the
steam oven no longer
switches from the
heating-up phase to the
cooking phase.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance
differs from the old one by at least 300 m.
To adjust the boiling temperature, you need to
descale the appliance (see “Care” in the “Cleaning
and care” chapter).
During operation an
unusually large amount
of steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
Replace the door seal.
This can be ordered from yor Miele dealer (see the
end of this booklet for contact details).
The oven interior
lighting is not working.
The lamp is defective.
Contact your Miele dealer to have the lamp
replaced.
The control panel will
not open or close
automatically despite
touching the
sensor
several times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive and can
prevent the panel opening or shutting if it picks up a
signal.
Open/close the control panel manually (see end of
this section)
If the problem occurs again, contact your Miele
dealer.
The
Start at
and
Finish at
functions are not
available.
The temperature in the oven compartment is too high,
e.g. after a programme has finished.
Open the door and let the oven compartment cool
down.
These functions are not generally available in
maintenance programmes.
