Description of functions
28
Control panel
The water container and the
condensate container are located
behind the control panel. The panel is
opened and closed by pressing the
sensor control. It is fitted with anti-
trapping protection. If the panel senses
resistance when opening/closing, the
process is cancelled.
Water container
The maximum filling volume is 1.4 l and
the minimum is 1.0 l. There are
markings on the water container. The
upper marking must never be
exceeded.
Water consumption depends on the
type of food and the cooking duration.
The water may need to be topped up
during cooking. Water consumption is
increased if the door is opened during
cooking.
Fill the water container to the maximum
level before each cooking programme
involving steam.
Condensate container
Condensate that collects in the
appliance from cooking is pumped into
the condensate container. The
container has a maximum capacity of
1.4 litres.
Temperature
Some functions have a pre-set
recommended temperature. This
temperature can be altered for a single
programme, a specific programme
stage or within the given range for a
programme. You can alter the
recommended temperature in 5 °C
increments, or 1 °C increments in sous-
vide cooking (see “Settings –
Recommended temperatures”).
Moisture
The
Combi mode
function and
Reheat
application use a
combination of oven heat and moisture.
The moisture level can be selected
within the given range for an individual
programme or a specific programme
stage.
Depending on the moisture setting,
moisture or fresh air is supplied to the
oven compartment. When the moisture
setting = 0 %, the maximum fresh air
supply is implemented and no moisture
is supplied. When the moisture
setting = 100 %, there is no fresh air
supply and the moisture content is at its
maximum.
Some food gives off moisture during
the cooking process. This moisture
from the food affects the amount of
additional moisture needed. If the
required amount of moisture is low, the
steam generator may not be activated
at all.
