Miele B 1312, Operating Instructions Manual

Page: 33 / 72

Steamer (B 1847 only)
The B 1847 Fashion Master is equipped
with a steamer in addition to the iron.
The steamer* can also be used with
models B 1312 and B 1826
(*optional accessory).
The steamer
a
facilitates the ironing of
hanging textiles, e.g. dresses and
jackets.
It is fitted with a removable brush
attachment
b
for raising and
straightening the fibres.
The steamer is lighter than the iron and
also has no hot sole plate, eliminating
the risk of shiny patches due to
unintentional contact with the textiles.
The steamer can also be used when
the appliance is dismantled.
The steamer can be plugged into the
steam connection as an alternative to
the iron.
^
Remove the steamer from the lower
compartment.
^
Disconnect the iron from the steam
connection in the tower. Pull back the
sliding mechanism on the steam
hose plug and withdraw the plug. Do
not pull on the steam hose.
^
Plug the steam hose of the steamer
into the steam connection.
Pull back the sliding mechanism on
the steam hose plug and release it
when it is plugged in.
You can change between the iron
and the steamer at any time during
ironing
without switching off the
system.
After switching between the iron and
steamer there is a pause before the
steam is ready to ensure that the iron or
steamer is sufficiently heated up.
The steamer is ready for use when the
*
indicator light on the tower control
panel lights up and signals that the
steam is ready.
Steamer
33