Ironing with steam
The burst of steam is controlled by the
*
button.
The fan starts up when the
*
button is
pressed.
The fan will continue running for a short
while after using steam.
For short bursts of steam:
^
Press the
*
button briefly and
release it again.
For constant steam:
^
Press the
*
button and at the same
time slide switch
b
backwards.
Now release the
*
button. Steam will
be continuously released.
^
To stop using steam continuously,
unlock the
*
button by sliding switch
b
forwards again. Steam output will
stop.
When putting the iron down on the
iron resting surface, the steam
*
button must be unlocked.
^
If the
k
indicator light comes on, fill
the water container (see "Filling the
water container").
When using the steam function for a
long time, make sure the room is
sufficiently ventilated, as high air
humidity can develop.
When using the steam function for a
long time during ironing, condensation
can build up in the ironing table. If you
notice condensation building up
underneath the ironing board, remove it
with a cloth. Sensitive flooring can be
damaged by droplets of water
Condensate can form in the steam hose
during pauses in ironing. This is
expelled by operating the steam button.
To avoid wet spots on your laundry, do
not direct the first burst of steam after a
pause onto the garment.
Ironing without steam
If you want to iron dry, you can save
energy by removing the water container
so that the steam generator is not
heated.
Ironing
30
Summary of Contents for B 1312
Page 71: ...71 ...
Page 72: ...M Nr 09 370 092 00 Alteration rights reserved 0913 ...
