MICROWELL DRY 300, Installation And User Manual

Page: 22 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 2 2
1. In order to be as efficient as possible, the appliance must be installed as high as possible but
not completely below the ceiling. It is forbidden to install the device on the floor, as the air
intake into the device is from below. It is necessary to ensure good air flow, for which it is
necessary to leave free space of min. 150 mm under the device and min. 200 mm above the
device. Due to maintenance, it is also necessary to leave free space of min. 200 mm on the
sides of the device.
2. It is not advisable to mount the dehumidifier close to heating elements, as the dehumidifier
could suck in heated air and this could delay its regulation. Also, placement above, for
example, a radiator can cause the device to overheat, malfunction, or be damaged. It is also
not advisable to place the dehumidifier near open windows, as it could suck in outside air
and it could also delay its regulation. The suction of outside air causes the moisture from the
pool hall not to be resolved and thus to accumulate in the pool hall.
3. If two dehumidifiers are used in one room, it is recommended to install the devices further
apart to ensure correct air flow in the pool hall and to achieve the desired humidity control
effect. Installation too close to each other can cause dry air to circulate between the devices.
This can result in excessive humidity in part of the pool hall. We also recommend maintaining
a distance of at least 1 meters between the devices for future installation and service.