MICROWELL DRY 300, Installation And User Manual

Page: 23 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 2 3
4. Always install the dehumidifier so that it can dehumidify pool air. In case of a structured pool
hall, or a separate part – the placemnt of a dehumidifier is not suitable as the air flow will not
be sufficient, thus the desired dehumidification effect may not be achieved.
5.2 Device fixation
A DRY 300 / DRY 400 / DRY 500 accessory is a mounting
bracket that must be fixed to the wall with the supplied screws
and dowels. The device has a self-supporting construction. The
axis of the mounting holes is 210 mm lower than the upper
edge of the device. The three mounting holes are 360 mm
apart. When the bracket is attached, the device can be hung
without removing the cover.
5.2.1 Mounting template
The mounting template is a large sheet of paper that is processed in a scale of 1: 1 ratio of the size of
the dehumidifier. Includes marking of dehumidifier drawing, wall bracket with screw holes, fixing
screws, water drain, power supply and LPHW connection from behind. Proceed by placing the
mounting template on the wall where the dehumidifier will be mounted - make sure that the holes in
Please use the enclosed mounting template.
Min. 1 m