MICROWELL DRY 300, Installation And User Manual

Page: 21 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 2 1
5.1 Device location
DRY 300, DRY 400 and DRY 500 WAVE are designed to be installed directly in the pool hall. All
models are protected by electrical protection class IP44.
ZONE 1, IPX4
ZONE 2, IPX2
OUTSIDE ZONE
at a distance of less than or equal to
1250 mm from the edge of the pool,
the lower edge of the device must be
at a height of 2500 mm from the
surface of the pool, if it is recessed
under the floor or from the floor.
min. 1250 mm (i.e. out of reach) from the side edge of
the sink at a height of min. 1200 mm from the floor,
cannot be above the sink.
at a distance of min. 1500 mm
from the vertical plane around
the jumping platforms, jumping
boards and starting blocks and
2500 mm above the highest
surface on which people are
expected to be present.
if the unit is at a distance less than or
equal to 1250 mm horizontally from
the edge of the pool, then it must be
lifted 2500 mm from the surface of
the pool, if it is recessed under the
floor and from the floor.
POOL
POOL
Pools that are not cleaned
by water jet
at a distance of 1250 to 2000 mm from the edge of the pool
they must comply with STN and at least 300 mm from the floor.
at a distance of 2000 to 3500
mm from the edge of the pool
must be in accordance with STN
and is required min. 150 mm
elevation above the floor due to
sufficient airflow, installation of
the device on the floor is
prohibited.
min. 1250 mm (i.e. out of reach) from the side edge of
the shower enclosure, cannot be above the shower
enclosure.
OUTSIDE ZONE
OUTSIDE ZONE
Pools that are not cleaned
by water jet