MICROWELL DRY 300, Installation And User Manual

Page: 17 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 1 7
Wireless communication takes place in the 868 MHz band, where the emphasis is on the reliability
and range of the controller. The dehumidifier is controlled primarily by a remote humidistat,
provided that the built-in humidity controller in the dehumidifier is set to a higher desired humidity
value than the remote humidistat.
If the backup humidistat had been set to a lower value than the DRY EASY 300 remote humidistat,
the backup humidistat will take over the room humidity control and in this case the dehumidifier will
not respond to signals from the DRY EASY 300 remote humidistat.
Broadcast indication
External wireless humidistat and thermostat DRY EASY 300
The manufacturer recommends setting the required humidity value on the DRY EASY 300 in the
range of 55 to 65% RH.
Additional functions and operation of the remote humidistat are described
in the separate enclosed instructions.
Battery status
indicator
Humidity
Tempera
Dehumidification
Indication of reaching/not
reaching required humidity
Indication of reaching/not
reaching required
temperature
Heating indicator
1. TRANSMITTER 2. RECEIVER 3. ANTENNA