MICROWELL DRY 300, Installation And User Manual

Page: 24 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 2 4
the wall bracket are balanced with a spirit level. Punch and mark them on the wall in the places
indicated for drilling. When positioning the holes, pay attention to the location of the electricity
supply and the condensate drain!
5.2.2 Brief installation instructions
D
etermine a location for mounting the dehumidifier. Choose a suitable position respecting all the
rules described above.
3x DRY 300/400/DRY 500
1.
Place mounting template on the wall. Before installing the
Athmoss cleaner, all construction work (painting, tiling,
heating, drainage, electricity, etc.) must be completed.
2. Using the mounting template and the spirit level, mark all
the holes that will need to be drilled. Remember to use
a spirit level. For safety reasons, i tis recommended to
fasten the device with two mor screws in the upper right
an dupper left corner – the location can be found on the
installation template.
3.
You must drill:
3 holes
for the DRY300/400/500 wall console, 2 diery holes for the
DRY300/400/500 fixing screws, an opening of
Ø
100mm for DRY300/400/500 fresh air supply
(in case your dehumidifier is equipped with this accessories, which is available on request).