MICROWELL DRY 300, Installation And User Manual

Page: 20 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 2 0
5. INSTALLATION MANUAL
The appliance must be installed in accordance with national installation and
wiring regulations!
Please note that the screws and dowels supplied with the appliance may only be
used on a solid concrete or a brick wall. Please check the base material and select
suitable screws and dowels.
The location of the device must be in accordance with the STN 33 2000-7-702
standard. It is recommended to place the device outside zones 0,1 and 2. When
placing the device in zones 2 or 1, the STN must be observed.
It is necessary to place the device outside zones where cleaning with spraying
water is expected. Connection to the electric network and protection must comply
with relevant standards. The power supply of the device must be realized by a
protective isolating transformer or protected by a residual current device with a
rated residual breaking current not exceeding 30 mA when installed in rooms
where water can be found.