MICROWELL DRY 300, Installation And User Manual

Page: 30 / 68

Installation and user manual D R Y 3 0 0 / 4 0 0 / 5 0 0 M e t a l / S i l v e r
V01/2022 | 3 0
5.4 Main power supply connection
5.4.1 Main electrical connection for fixed cable in wall
As standard, the dehumidifiers are connected to a fixed cable in the wall. Connecting the device to an
el. network must comply with the relevant security standards. Connection requirements are: Power
supply: 220-240 V / 50 Hz / 1f. Fuse: 16A (DRY 300/400/500) with residual current device (RCD) with
a rated residual current not exceeding 30 mA. The main switch of the device must be located outside
the pool hall. The main switch of the appliance must be bipolar with the switch of the L and N wires.
The appliance must be placed on a solid surface to disconnect the appliance from the mains. The
distance between the contacts, when switched off, must be at least 3 mm for all poles.
The appliance must be connected to
the mains by a certified electrician.
Mind all electrical safety precautions.
The mains terminal block is located in this black box
Standard terminal block -
L, N, ground