iSERIES Network Cameras ·
User Manual
Appendix 2 Port Mapping
The following settings are for TP-LINK router (TL-WR641G). The settings vary
depending on different models of routers.
Steps:
1.
Select the
WAN
Connection Type
, as shown below:
Figure A.2.1 Select the WAN Connection Type
2.
Set the
LAN
parameters of the router as in the following figure, including IP
address and subnet mask settings.
Figure A.2.2 Set the LAN parameters
3.
Set the port mapping in the virtual severs of
Forwarding
. By default, camera
uses port 80, 8000, 554 and 8200. You can change these ports value with web
browser or client software.
Example:
When the cameras are connected to the same router, you can configure the
ports of a camera as 80, 8000, 554 and 8200 with IP address 192.168.1.23, and
