iSERIES Network Cameras ·
User Manual
Overexposure Prevention:
Enable or disable the function in this field.
Exposure Time:
Value ranges from 1/3 to 1/100,000s. Adjust it according to the lightening condition.
Iris Mode:
Auto and Manual are selectable.
Auto Iris Level:
If you choose the auto iris mode, you can set the auto iris level.
Video Standard:
50 Hz and 60 Hz are selectable. Choose according to the different video standards;
normally 50Hz for PAL standard and 60Hz for NTSC standard.
Day/Night Switch:
Day, Night and Auto are selectable.
Sensitivity:
If you choose auto day/night switch, you can choose the sensitivity of the switch as
high, normal and low.
Mirror
：
The mirror function enables you to view another aspect of the image. You can flip
the image horizontally and vertically. It can be used to view the image in the way
you see it directly using your eyes.
WDR:
Wide dynamic range can be used when there is a high contrast of the bright area
and the dark area of the scene.
BLC Area:
BLC area is the area sense the light intensity; Close, Up, Down, Left, Right and
Center are selectable.
White Balance:
The below figure shows the white balance type selectable. You can
choose it according to the real condition. For example, if in the surveillance scene,
there is a fluorescent lamp, you can choose the white balance type as the
Fluorescent Lamp.
43
