iSERIES Network Cameras ·
User Manual
Figure 5-11
PPPoE Settings
2.
Check the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
The User Name and Password should be assigned by your ISP.
4.
Click
Save
to save and exit the interface.
A reboot is required for the settings to take effect.
5.3.5
Configuring SNMP Settings
Purpose:
You can set the SNMP function to get camera status, parameters and alarm related
information and manage the camera remotely when it is connected to the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address, the
camera can send the alarm event and exception messages to the surveillance center.
The SNMP version you select should be the same as that of the SNMP software. And you
also need to use the different version according to the security level you required. SNMP v1
provides no security and SNMP v2 requires password for access. And SNMP v3 provides
encryption and if you use the third version, HTTPS protocol must be enabled.
Steps:
1.
Enter the SNMP Settings interface:
Configuration >
Advanced Configuration >
Network > SNMP
32
