iSERIES Network Cameras ·
User Manual
Tasks 3: Set the Alarm Actions for Motion Detection.
Purpose:
You can specify the linkage method when an event occurs. The following
contents are about how to configure the different types of linkage method.
Figure 5-30
Linkage Method
Steps:
(1)
Check the checkbox to select the linkage method. Audible warning, notify
surveillance center, send email, upload to FTP, trigger channel and trigger alarm
output are selectable (Optional).
Audible Warning
Trigger the audible warning locally.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to refer to
Section 6.3.10
to set the
related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Set the FTP address and the remote FTP server first. Refer to
Section 6.3.8
for detailed
information.
Trigger Channel
50
