iSERIES Network Cameras ·
User Manual
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of
Trigger Channel
in the
Linkage
Method
of Motion Detection Settings interface. For detailed information,
please refer to the
Task 1 Set the Motion Detection Area in the Section
6.6.1.
Record Triggered by Alarm
If you select
Alarm
, the video will be recorded when the alarm is
triggered via the external alarm input channels.
Besides configuring the recording schedule, you have to set the
Alarm
Type
and check the checkbox of
Trigger Channel
in the
Linkage Method
of
Alarm Input Settings
interface. For detailed information, please refer
to
Section 6.6.3
.
Record Triggered by Motion & Alarm
If you select
Motion & Alarm
, the video will be recorded when the
motion
and
alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.3
for detailed information
.
Record Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded when the
external alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.3
for detailed information
.
(3)
Check the checkbox
and click
to copy settings of
this day to the whole week. You can also check any of the checkboxes before
the date and click
.
(4)
Click
OK
to save the settings and exit the
Edit Record Schedule
interface.
6.
Click
Save
to save the settings.
6.3
Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the SD card (if supported) or the netHDD (For
60
