Microview A13B User Manual Download

Page: 15 / 81

iSERIES Network Cameras ·

User Manual

Chapter 3

Access to the Network

Camera

3.1

Accessing by Web Browsers

Steps:

Open the web browser.

In the address field, input the IP address of the network camera, e.g.,

192.0.0.64 and hit the enter key to enter the login interface.
3.

Select the language from the top-left of the page.

Input the user name and password and click

Login

●

The default user name is admin, and the password is 12345.

●

Multi-language is supported. English, Simplified Chinese, Traditional Chinese,
Russian, Turkish, Japanese, Korean, Thai, Bulgarian, Hungarian, Czech, Slovak,
French, Italian, German, Spanish, Portuguese, Polish, Greek, Dutch, etc.

Figure 3-1

Install the plug-in before viewing the live video and operating the camera.

Please follow the installation prompts to install the plug-in.

Summary of Contents for A13B


















































































Search results

Summary of Contents for A13B

Reviews:

Related manuals for A13B

Brands by name

Popular brands

Microview A13B, User Manual

Search results

Summary of Contents for A13B

Reviews:

Related manuals for A13B

Brands by name

Popular brands