iSERIES Network Cameras ·
User Manual
You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface:
Configuration > Basic Configuration >
Network > Port
Or
Configuration > Advanced Configuration >
Network > Port
Figure 5-7
Port Settings
2.
Set the
HTTP port, RTSP port and HTTPS port of the camera.
HTTP Port
: The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port:
The default port number is 554, and it can be changed to any port
No. which is not occupied.
HTTPS Port:
The default port number is 443, and can be changed to any port No.
which is not occupied.
Server Port:
The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
3.
Click
Save
to save the settings.
A reboot is required for the settings to take effect.
5.3.3
Configuring DDNS Settings
Purpose:
If your camera is set to use PPPoE as its default network connection, you can use
the Dynamic DNS (DDNS) for network access.
Before you start
:
Registration on the DDNS server is required before configuring the DDNS settings of
the camera.
Steps:
1.
Enter the DDNS Settings interface:
29
