Microtronics myDatalogNANO, User Manual

Page: 43 / 132

Chapter 7 Installation
7.2.3 Pipe assembly
The optional "Pipe mounting kit for myDatanet housing 86x126 (206.660)" equipment is required for the pipe
assembly.
Step 1 of the pipe assembly Step 2 of the pipe assembly
1 myDatalogNANO 3 Assembly loop (included in the scope of delivery of
206.660)
2 Delta PT M3.5x8 Torx 15 (included in the scope of
delivery of 206.660)
4 Cable binder (included in the scope of delivery of
206.660)
1. First attach the assembly loop (3) using the screws (2) included in the "Pipe mounting kit for myDatanet
housing 86x126 (206.660)" equipment set to the myDatalogNANO (see "Step 1 of the pipe assembly "
on page 43).
2. Position the myDatalogNANO with the attached assembly loop (3) on the pipe and use the supplied
cable binders (4) to secure the myDatalogNANO (see "Step 2 of the pipe assembly" on page 43).
Rev. 02 43