Microtronics myDatalogNANO, User Manual

Page: 56 / 132

Note:
Example to explain the burst interval in conjunction with the ext. warmup time (ext. warmup time <
measurement cycle): warmup time (ext. warmup time < measurement cycle):
Basic setting Record interval 5min.
Burst interval 60 sec.
Measurement cycle 15 sec.
Output channels Ext warmup time 5
Unit sec.
Measurement channels -
>Config. Decay med
Time 60 sec.
Output on the device Sensor supply
Formation of the measurement value: In each case, the sensor supply is activated 5 sec before expiry of the
measurement cycle. This results in four valid measurements that are used to determine a median and are
recorded as the measurement value.
56 Rev. 02