Microtronics myDatalogNANO, User Manual

Page: 40 / 132

The installation site must be selected according to specific criteria. The following conditions must be avoided
in any case:
l
Direct sunlight
l
Direct weather exposure (rain, snow, etc.)
l
Objects that radiate intense heat (maximum ambient temperature: -10...+50°C)
l
Objects with a strong electromagnetic field (frequency converter or similar)
l
Corrosive chemicals or gases
l
Mechanical impacts
l
Direct installation on paths or roads
l
Vibrations
l
Radioactive emissions
Note: Leave sufficient space at the upper end to mount the antenna. The space required depends on the
antenna used. Approx. 10 cm are required for the antenna included in the standard scope of delivery. Approx.
13 cm of space must be left beneath the device for the cable connections. Further information regarding the
installation dimensions can be found in the relevant sub-chapter.
7.2.1 Wall mounting
For wall mounting the optional "Universal bracket for housing myDatanet 86x126 (206.640)" equipment is
required.
Step 1 of the wall mounting Step 2 of the wall mounting
1 myDatalogNANO 3 Assembly loop (included in the delivery scope of
206.640)
2 Delta PT M3.5x8 Torx 15 (included in the delivery
scope of 206.640) 4 Raised head tapping screw 3.5x32 (included in
the delivery scope of 206.640)
1. First attach the assembly loop (3) using the screws (2) included in the "Universal bracket for housing
myDatanet 86x126 (206.640)" equipment set to the myDatalogNANO (see "Step 1 of the wall
mounting" on page 40).
40 Rev. 02