76 Microtek ScanWizard EZ - Professional Mode Reference Manual
Function Buttons
The function buttons at the bottom of the Scan Job Queue window can be used
for multiple job selections. The New and Load/Save button can be used on only
one selected scan job. The Duplicate, Delete, and Check buttons can be used,
however, on multiple selected scan jobs.
Selecting Multiple Scan Jobs
The
Duplicate
,
Delete
, and
Check
buttons at the bottom of the Scan Job Queue
window can be used for multiple job selections.
For example, you can select multiple scan jobs, and then click the
Delete
button
to remove all the jobs simultaneously.
To select multiple scan jobs, press the
Ctrl
or
Shift
key and click on the jobs to be
selected.
Editing Multiple Scan Jobs
ScanWizard EZ lets you edit multiple scan jobs at the same time, increasing your
efficiency in using the software.
To edit multiple scan jobs, simply select all the scan jobs to be edited in the Scan
Job Queue window.
To include each scan job for selection, use the
Shift
+ Click combination
(pressing the
Shift
key while clicking the mouse at the same time). Then perform
the selected editing function.
For instance, you can go to the Settings window and choose an image type that
will apply to all the scan jobs. Another example is to apply a common resolution
setting to all the scan jobs. Simultaneous editing simplifies the scanning process
for you.
Summary of Contents for ScanWizard EZ
Page 1: ...Reference Manual...
Page 35: ...For Professional Mode Microtek ScanWizard EZ Reference Manual...
Page 40: ...vi...
