Microscan Vision Hawk Smart Camera, Manual

Page: 91 / 98

Serial Commands
E
Vision HAWK Smart Camera Guide E-5
JOBINFO [[-slot=]n] [-v]
Gets job summary or info about slot n .
JOBINFO with no arguments returns a list of all jobs on the device.
-v = Verbose n . This option shows the amount of space that would be
freed if the job were deleted. It also lists the total disk space and free disk
space.
JOBBOOT [-slot=]<n>
Sets bootup job slot n (RS-232 only).
JOBDOWNLOAD <-transfer=ymodem>
Downloads .avz job packaged via transfer method (RS-232 only).
SET <tagname> <value>
Sets value of a global tag.
The tagname must correspond to one of the supported tags within the
device.
The value can contain spaces.
The command is terminated by a carriage return and/or line feed
character.
The value can be a list of comma-separated items to set a sequence of tags:
Send SET int1 1, 2, 3 to set int1 = 1, int2 = 2, int3 = 3.
The AVP service allows setting of step and datum information from the job
tree using forward slash ‘/’ in the symbolic name path.
SET
avp/insp1/snapshot1/acq1/gain 2.0 paths are not case-sensitive and do
not need to be fully qualified if unique.
SET avp/acq1/gain 2.0 will set the same gain value if there is only one
acquire.