Chapter
3
Optics and Lighting
3-14
Vision HAWK Smart Camera Guide
White Balance Calibration
Before running white balance calibration, place a white object such as a
piece of paper in front of the camera at the current focus plane. Then
initiate the white balance operation by selecting the white balance icon
shown below. The color channel gains are then equalized such that the
white object appears white.
After white balance calibration, the white balance gain values are updated
and the results are saved as customer parameters.
Restore Preset White Balance Configuration
The Vision HAWK unit is pre-configured with factory calibrated white
balance settings. To restore the color channel gain to these preset values,
select the preset white balance icon as illustrated below:
After this operation, the white balance gain values are restored to the
factory preset values and saved as customer parameters.
Summary of Contents for Vision Hawk Smart Camera
