Vision HAWK Color
Optics and Lighting
3
Vision HAWK Smart Camera Guide
3-17
•
Whenever an “unlocked” device parameter is updated, two
things happen:
–
The device global data in RAM is updated;
–
The job loaded in RAM is updated.
•
When a job is saved to a job slot, the device global data file in
the /Config flash folder is updated.
–
Fixed:
Values last saved in the job are used.
•
If a job is opened on the PC or from a flash job slot on the
device, and if a device parameter is locked, the value saved
in the job is used.
–
Job device parameter loaded in RAM = Job device
parameter opened (Flash Slot/PC).
–
The global device parameter file is untouched.
•
Whenever a “locked” device parameter is updated, the job
loaded in RAM is updated.
Summary of Contents for Vision Hawk Smart Camera
