64 Controlling the Printer via the integrated Website (WebPanel)
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
7.3.6. EEPROM Page
Attention:
You have to be
very careful
when changing parameters via the EEPROM
page. If you use wrong parameters, the printer could hang up!
Before you change EEPROM parameters
of the print system it is
recommended to generate a
Status Sheet
! This facilitates a reset of the printer
(resetting the parameters to the former settings).
The parameters must be written in hexadecimal numbers (0000 to FFFF). These
EEPROM values are printed out in the first to third line of the Status Sheet.
Fig. 7.3.6.a logiJET T4-2 /T6-2: EEPROM page of the MICROPLEX WebPanel
Calls up the
EEPROM page
