128 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
9.27. Image Shifting to the X-Direction
This function shifts the print image in relation to the paper to the
X-direction (crosswise the print direction).
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1
]
[Engine
]
[Printspeed ]
[Image X-Pos.
]
[X-Pos.:
0 Dot ]
[X-Pos.: +160 Dot]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to
the menu structure.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[Image X-Pos.] is displayed.
The panel function Image Shifting to the
X-Direction is selected.
C
urrently set value (0 =Default).
Operating the NEXT or PREVIOUS key
the value for the image shift can be
altered. Values from -288 up to +288
Dot are settable, so a max. image
shifting of appr. ±1 Inch (approx. ±25
mm) can be reached.
Now the new image X-Position is saved
In addition this new value can be saved
as setup value (using the ENTER key).
After this decision turn the printer
ONLINE again: Press the ONLINE key
longer than 2 seconds.
