_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
If the panel settings above shall be effective permanently (that
means they do not have to be put in again after a printer
OFF/ON) the setting values can be saved permanently by
operating the ENTER key two times.
An output of the current setting values can be generated using the
"Printing the Status Sheet“ panel function (see section 9.8).
After each material changing (print media/label material) the
sensors have to be suitable adjusted (via automatic adjustment or,
if necessary, via sensor current and switching threshold, see
section 9.3 Adjusting the Sync Sensor).
Detailed information on the operations above and to further
functions of the printers logiJET T4-2 /T6-2 /RFID can be found in
the following chapters.
