_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
5.3. Handling of Ribbon (Foil)
5.3.1. Ribbon Loading
If you want to operate the printer in the thermal transfer mode a
printer ribbon has to be used (compare section 1.1).
Make sure you always use a printer ribbon being wider than the
media to print on. In the case of printing on abrasive media
printhead damaging can be avoided this way.
To set the ribbon go on like this:
1.
Switch the printer to OFF LINE mode.
2.
Open the printer hood.
3.
Release the printhead pressure lever to lift the pressure
rollers.
Fig. 5.3.1.a Swivel the printhead pressure lever upward (counterclockwise).
4.
Take the ribbon roll and remove the protection foil, if
necessary (by unwinding it and cutting it off).
5.
Find out the right winding direction for your ribbon roll:
