_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
10.2.6. Reading the Label Identification Number automatically
This function enables to read the transponder identification number (ID) of RFID labels
during the print process and send it to the host automatically (Status message: page
handshake incl. ID). Compare IDOL commands in section 10.4.2 and 10.4.4.
In addition this function helps to find the optimal tag position (see section 10.2.3) by
reading the label automatically and showing the reading results on the panel display.
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1
]
[Engine
]
[Printspeed ]
[RFID Menu
]
[RFID Mode ]
[Autom. Read ID ]
[OFF ]
[ON ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to the
menu structure.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[RFID Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Autom. Read ID ] is displayed.
Press the NEXT or PREVIOUS key until the
desired value is displayed.
The automatic label ID reading function is
selected.
In addition this new value can be saved as
setup value (using the ENTER key).
After this decision turn the printer ONLINE
again: Press the ONLINE key longer than 2
seconds.
