164 Using the RFID Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET T4-2 /T6-2 /RFID
Edition 2.2
10.4.4. Generating a Page ID Number, Receiving the RFID data after
Printing
The following IDOL command is used to get the RFID data and, in addition,
to generate a page ID number:
<ESC><ESC>: 0019<ddd><Page ID>
This command is used to generate a
printer status message, which is sent
via the SOLID status channel. This
message includes the RFID data and
the page ID number
Parameters:
<ddd> = string length (3 digits, decimal).
000 is to be used, if no text string shall
be added.
The maximum string length is 31 characters.
<Page ID> = Text string (ASCII characters).
A page identification number, e.g., can be
added here. (The text string will be stored
as a page acknowledgement string.)
Note:
Status request commands (command type <ESC><ESC>: <nnnn>) can be
used only if the printer is ON LINE. As soon as the printer is in the
OFF LINE state, no more commands can be sent to the printer.
The printer is able to send a message just in that moment he's switching
to the OFF LINE mode:
Set the printer to the automatical status message mode (EEPROM Word 23
Bit 13 = 0). Then status messages (OFF LINE, Paper Jam ...) will be sent to
the host automatically.
