MICRO-EPSILON optoNCDT ILR 1183, Operating Instructions Manual

Page: 18 / 48

Page 18
Installation
optoNCDT ILR 1183
5.3.1 Power Supply, SSI-Interface
The assignment of the power supply/SSI results from a 12-pole round-type (flangemount) series 723 connec-
tor from Binder. It is sealed against the casing to comply with IP 65 requirements.
This connector type guarantees optimized screening and a high IP degree. The required counterpart is an
adequate female cable connector with grading ring.
A cable set with open ends is optionally available.
Bending radius of the supply and output cable PC11x (available as an optional accessory):
- 47 mm (once)
- 116 mm (permanent)
Pin
Color Assignment
A white SSI C+
view on solder pin side,
12-pole female cable
connector
B brown SSI C-
C green TRIG
D yellow n.c.
E grey SSI D-
F pink SSI D+
G red
power supply 10 ... 30 VDC
H black n.c.
J violet ground
K grey/pink switching output 2
L red/blue n.c.
M blue switching output 1
Fig. 7 Pin assignment for power supply and SSI interface
H
M
G
J
K
A
L
B C
D
E
F