MICRO-EPSILON optoNCDT ILR 1183, Operating Instructions Manual

Page: 10 / 48

Page 10 optoNCDT ILR 1183
The following warning label is attached on the sensor housing (top side):
t=160ps f=1.2GHz
 =650nm
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN 60825-1: 2014
P  1mW
THIS PRODUCT COMPLIES
WITH FDA REGULATIONS
21CFR 1040.10 AND 1040.11
IEC label Only for USA
i
If both warning labels are disguised in operation mode the user must add additional warning labels.
During operation of the sensor the pertinent regulations according to EN 60825-1 on “radiation safety of laser
equipment“ must be fully observed at all times. The sensor complies with all applicable laws for the manufac-
turer of laser devices.
Although the laser output is low looking directly into the laser beam must be avoided. Due to the visible light
beam eye protection is ensured by the natural blink reflex.
opto
NCDT
ILR
THIS PRODUCT COMPLIES
WITH FD
A REGULA
TIONS
21CFR 1040.10 AND 1040.11
t=160
ps
f=1.2GHz

=650 nm LASER RADIA
TION
DO NOT ST
ARE INTO BEAM
CLAS
S 2 LASER PRODUCT
EN 608
25-1: 2014
P

1 mW
Fig. 1 True reproduction of the sensor with its actual location of the warning labels