Page 27
Operation
optoNCDT ILR 1183
6.
Operation
Connect and firmly screw on Profibus terminals.
Connect the terminals for the power supply/SSI.
Protect all cable ends, which you don‘t use, before you turn on the power supply. So you avoid shorts.
The user is required to implement:
- the application-specific wiring
- the application-specific parameterization of the Profibus, the slave address.
Turn-on the voltage supply for the sensor.
Trigger the distance measurement.
The laser comes on and Profibus or SSI launches measurement.
Install the sensor using the visible laser spot as part of preparative actions in the designated working
site, oriented onto the target and keep it in a stable position. The target to be measured should preferen-
tially have a homogeneous, white surface.
Fix the sensor.
The sensor provides a visible laser beam for greater convenience in alignment. Its visibility is conditional on
the amount of ambient light present and on the type of surface of the target to be measured.
Reflector
Reflector
Reflector
Fig. 13 Measurement against a reflector
Summary of Contents for optoNCDT ILR 1183
Page 6: ...optoNCDT ILR 1183...
Page 47: ......
