Page 9
Laser Class
optoNCDT ILR 1183
1.4
Intended Use
The sensor is designed for use in industrial and laboratory applications. It is used for
displacement measurement
for special measuring functions
- The sensor must only be operated within the limits specified in the technical data, see Chap.
- The sensor must be used in such a way that no persons are endangered or machines and other material
goods are damaged in the event of malfunction or total failure of the sensor.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
Proper Environment
- Protection class: IP 65
- Operating temperature: -10 to +50 °C (+14 to +122 °F)
- Storage temperature: -20 to +70 °C (-4 to +158 °F
- Humidity: < 65 % (no condensation)
- Ambient pressure: atmospheric pressure
2.
Laser Class
The optoNCDT ILR 1183 sensor operates with a wavelength of 650 nm (visible, red). The maximum optical
output is
≤ 1 mW. The sensors are classified in Laser Class 2 (Class II).
Class 2 (II) lasers are not notifiable and a laser protection officer is not required either.
The housing of the optical sensors may only be opened by the manufacturer. For repair and service purposes
the sensors must always be sent to the manufacturer.
The laser warning labels for Germany have already been applied. Those for other non German-speaking
countries an IEC standard label is included in delivery and the versions applicable to the user‘s country must
be applied before the equipment is used for the first time.
i
Do not look directly into the laser beam!
Close your eyes or turn away promptly if laser radiation strikes your eyes.
Summary of Contents for optoNCDT ILR 1183
Page 6: ...optoNCDT ILR 1183...
Page 47: ......
