Page 8
Safety
optoNCDT ILR 1183
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor
Avoid shocks and impacts to the sensor.
> Damage to or destruction of the sensor
Protect the cables against damage.
> Failure of the measuring device
Do not turn the module on if there is fogging or soiling on its optical parts.
> Failure of the measuring device
Do not touch any of the module’s optical parts with bare hands. Proceed with care when removing dust or
contamination from optical surfaces.
> Failure of the measuring device
i
Information and warning signs must not be removed.
1.3
Notes on CE Marking
The following apply to the ILR 1183:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU, “RoHS“ category 9
Products which carry the CE mark satisfy the requirements of the EU directives cited and the European
harmonized standards (EN) listed therein. The EU Declaration of Conformity is available to the responsible
authorities according to EU Directive, article 10, at:
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
The measuring system is designed for use in industrial environments and meets the requirements.
Summary of Contents for optoNCDT ILR 1183
Page 6: ...optoNCDT ILR 1183...
Page 47: ......
