Page 6
Safety
optoCONTROL CLS1000
1.4
Intended Use
The optoCONTROL CLS1000 is designed for use in an industrial environment. It is used
for optical and non-contact detection of a diameter, an edge, or a gap
for detecting the presence of a target
for detecting the position of components
for position and assembly control in automated assembly machines and supply systems
for presence control
for checking length and diameter.
- It is only permissible to operate the system with the values specified in the technical data
- The system must be used in such a way that no persons are endangered or machines and other material goods are
damaged in the event of malfunction or total failure of the system.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
Proper Environment
- Protection class:
IP65
- Temperature range:
Operation:
-5 ... +55 °C (+23 ... +131 °F)
Storage:
-10 ... +70 °C (+14 ... +158 °F)
Humidity:
5 ... 95% (non-condensing)
- Ambient pressure: Atmospheric pressure
For use in environments in which there are particularly strong high-frequency influences, deviations in the specified pre-
cision tolerances can occur at certain frequencies.
