MICRO-EPSILON optoCONTROL CLS1000, Operating Instructions Manual

Page: 44 / 52

Page 44
Operation
optoCONTROL CLS1000
Function Description Menu
Switching output The switching output is set according to the switching threshold.
This depends on the
T
(Teach-in) menu , see 5.4.3 .
The switching outputs can be individually configured, provided they do not
mutually influence on one another. Parameterization/operation via membrane
keyboard and Operating menu
, see 5.3
PP (Push-Pull), PNP, NPN
T
Switching polarity SP
Light switching
and
Dark switching
, see 5.5
Parameterization/operation via membrane keyboard and Operating menu , see
5.4.4.1 ; indicated via display on controller.
Q1
>
OPM
Switching threshold 1 ... 99 % light intensity; corresponds to 100 ... 4000 bits; 80 % = 3200 bits;
hysteresis 2 ... 25 %; 5 %
T
Q1
Signal spread/ Mea-
surement value
spread Analog spread of the analog output. It is possible to scale an important signal
range to the entire analog range.
Parameterization/operation via membrane keyboard and Operating menu
, see
5.3, see 5.4.5.1 ;
indicated via display on controller..
ANA
>
SPRD
Teach functions Parameterization/operation via membrane keyboard and Operating menu , see
5.4.3 ;
indicated via display on controller.
T
Triggering The sensor can be triggered via Pin 5 in the trigger versions.
Operation via membrane keyboard and Operating menu
, see 5.4.6 ;
indicated via display on controller.
SEN
>
TRG
WatchDog Restart in case of error. In the event of a controller error, the controller restarts
(Error recovery). -